The Unique Perago Rotating Blaster
The PERAGO Blaster uses hard metal studs to hit the surface very much like the grains of a sandblaster, and produces much the same result. However, Perago does not use tons of sandblasting material, with all its attendant purchase and clean-up costs, dust, HSE risks and environmental damage. A Perago single disc costs less than one bag of grit.
Perago works by the interaction between the centrifugal force on the studs and the resilience of the rubber, which produces oscillations as well as a radial back-and-forth motion in the hard metal studs.
Perago is not a grinder or a brush. The Perago disc cannot clog even when removing sticky materials like glue, bitumen, tar and car underbody coating.
It Excels at rust removal because a blasting method like Perago opens the rust-pores. Grinding and brushing do not, merely covering them by fresh metal and dust. Grinding or brushing will heat up the surface, resulting in quick oxidization. By contrast, PERAGO induces little heat at the surface, and will not accelerate the oxidization process
Before and after 
|
Perago Blaster Triple
Perago quickly removes gel-coat from glass-fibre surfaces. (Another version removes paint from wood and GRP - see Perago Scraper below)
The PERAGO Blaster for metal comes in three different variants with 8mm spindle for use in hand held power drills: Single, Double and Triple
 
Double Single |
|
Perago Multi
For industrial use, the Perago Multi combines 7 Blaster discs on a hexagonal shaft with M14 thread. The Multi is intended for use in angle polishing machines up to a maximum of 4000 rpm.
NB: Perago discs should never be used in angle grinders as the very high rotational speeds of this type of machine will cause severe vibration problems and the premature break up of the disk.
Multi 
Perago Scraper
A unique new tool for easy removal of old paint and varnish from wood, the Perago Scraper is durable, affordable, fast, non-clogging, effective – it is the solution to all demands for paint removal from wood
PERAGO Scraper is a rotating head powered by your electric or pneumatic drill. It replaces your hand-powered scraper, effortlessly revealing a clean surface and saving many hours of tedious labour
The PERAGO Scraper consists of toothed scraping irons vulcanised into a disc of natural rubber. Revolving at 2000 rpm, this equals a linear movement of over 800 metres per minute – a rate impossible to achieve by hand. No wonder Perago works fast. Perago is its own fan, cooling the work surface and removing dust. It is ideal for smoothing new filler
|
|
Perago Multi in use
Scraper
 |
The PERAGO Scraper, which is easily fitted onto any common power drill, is available in three different models, Soft, Medium, and Hard. Soft is for fine furniture and interior woodwork. Medium can be recommended for boat topsides/exteriors, window trims etc., whilst Hard is the best choice for boat underwater areas, house facades, fences, garden furniture and other outdoor wooden items.
Buy Perago online here
|
